Drill Intersections

Drill hole
ID
From (m) To (m) Interval
(m)
Gold (g/t)
Uncut
Gold (g/t)
Top cut*
Silver
(g/t)
 
SDD-001 No Significant Intercept
 
SDD-002 58.0 70.9 12.9 3.80 - 38.68
SDD-002 92.1 95.6 3.5 1.69 - 7.17
 
SDD-003 22.0 45.7 23.7 0.76 - 42.84
SDD-003 49.9 58.6 8.7 1.17 - 37.90
 
SDD-004 3.9 12.7 8.8 0.71 - 28.10
SDD-004 15.8 17.8 2.0 0.71 - 21.95
SDD-004 26.2 49.9 23.7 1.17 - 49.64
 
SDD-005 0.8 14.0 13.2 1.07 - 39.22
SDD-005 20.1 38.2 18.1 2.75 - 55.71
 
SDD-006 0.0 5.7 5.7 1.74 - 31.73
 
SDD-007 13.1 25.8 12.7 1.60 - 28.89
 
SDD-008 0.0 11.5 11.5 4.25 - 87.80
 
SDD-009 No Significant Intercept
 
SDD-010 No Significant Intercept
 
SDD-011 No Significant Intercept
 
SDD-012 45.5 49.9 4.4 0.78 - 8.76
SDD-012 62.4 73.4 11.0 0.98 - 10.22
 
SDD-013 Results Pending
 
SDD-014 78.4 82.2 3.8 1.62 - 16.97
SDD-014 84.2 86.2 2.0 1.01 - 6.30
 
SDD-015 No Significant Intercept
 
SDD-016 42.3 46.7 4.4 0.77 - 17.9
SDD-016 68.1 71.3 3.2 0.74 - 17.3
 
SDD-017a Re-drill Results Pending
 
SDD-018 34.7 38.7 4.0 1.58 - 67.60
SDD-018 40.7 46.8 6.1 2.17 - 92.52
SDD-018 64.4 69.1 4.7 1.20 - 34.8
 
SDD-019 12.1 37.3 25.2 6.40 5.45 57.8
including 23.3 36.3 13.0 11.22 9.38 70.5

*A top cut of 20g/t was applied to a drill intersection.

The drill intersections disclosed here have not yet been included in a resource model and true thickness of mineralization has not yet been determined. Drill holes are designed to intersect mineralization perpendicular or close to perpendicular. Drill intersections are calculated using a top-cut of 20 g/t gold, a 0.3 g/t gold trigger, a minimum 0.7 g/t gold composite, and a maximum of 1.5 metres consecutive waste.

Subscribe to our Email List