| Drill hole ID | From (m) | To (m) | Interval (m) | Gold (g/t) Un-cut |
|---|---|---|---|---|
| ODD-001 | 34.6 | 65.5 | 30.9 | 5.35 |
| including | 39.6 | 56.5 | 16.9 | 8.88 |
| ODD-001 | 77.1 | 99.6 | 22.5 | 1.43 |
| ODD-002 | 0.8 | 15.5 | 14.7 | 0.52 |
| ODD-002 | 89.5 | 92.5 | 3.0 | 2.03 |
| ODD-002 | 162.8 | 167.7 | 4.9 | 1.49 |
| ODD-003 | 102.0 | 104.0 | 2.0 | 4.74 |
| ODD-004 | 87.0 | 93.2 | 6.2 | 0.56 |
| ODD-005 | 35.9 | 39.1 | 3.2 | 0.60 |
| ODD-005 | 92.3 | 99.3 | 7.0 | 0.94 |
| ODD-005 | 123.3 | 127.3 | 4.0 | 0.77 |
| ODD-006 | 0.1 | 9.8 | 9.7 | 1.04 |
| ODD-006 | 62.0 | 91.1 | 29.1 | 2.46 |
| ODD-007 | No significant intercepts | |||
| ODD-008 | 112.7 | 115.6 | 2.9 | 8.64 |
| ODD-008 | 141.5 | 154.6 | 13.1 | 1.35 |
| ODD-009 | 117.2 | 120.2 | 3.0 | 1.60 |
| ODD-010 | 154.1 | 157.4 | 3.3 | 0.54 |
| ODD-014 | 1.8 | 5.8 | 4.0 | 0.55 |
| ODD-015 | 58.2 | 66.8 | 8.6 | 2.28 |
| ODD-015 | 97.2 | 104.1 | 6.9 | 0.56 |
| ODD-016 | 3.6 | 6.6 | 3.0 | 0.80 |
| ODD-016 | 15.2 | 18.0 | 2.8 | 0.73 |
| ODD-016 | 107.7 | 114.7 | 7.0 | 1.10 |
| ODD-016 | 131.7 | 135.8 | 4.1 | 1.83 |
| ODD-017 | 84.3 | 88.3 | 4.0 | 2.13 |
| ODD-018 | 26.8 | 32.8 | 6.0 | 0.62 |
| ODD-019 | 13.0 | 18.0 | 5.0 | 0.67 |
| ODD-019 | 67.0 | 71.0 | 4.0 | 0.50 |
| ODD-020 | 49.6 | 52.6 | 3.0 | 0.68 |
| ODD-021 | No significant intercepts | |||
| ODD-022 | 31.2 | 34.4 | 3.2 | 0.58 |
| ODD-022 | 72.5 | 76.1 | 3.6 | 2.23 |
| ODD-022 | 85.0 | 95.2 | 10.2 | 2.55 |
| ODD-022 | 122.1 | 124.1 | 2.0 | 0.89 |
| ODD-023 | No significant intercepts | |||
| ODD-024 | Results Pending | |||
The drill intersections disclosed here have not yet been included in a resource model and true thickness of mineralization has not yet been determined. Based on geological interpretation, true width in drill hole ODD-001 is estimated to be approximately 80% of drilled intersection. Drill holes are designed to intersect mineralization perpendicular or close to perpendicular.